The Bobcat 640 series is based on an in-house developed, temperature stabilised InGaAs detector with a 640 x 512 pixel resolution.
The Bobcat 640 cameras are offered with high frame rate of 100 Hz. The camera comes with a CameraLink or GigE Vision interface and features low weight and power.
Either for machine vision inspection or scientific research, the compact Bobcat 640 meets requirements of high sensitivity in the SWIR range. We offer a visible enhanced short-wave infrared (vSWIR) option for extended wavelength response into the visible band.
Benefits & Features
• vSWIR optional
• Low noise, low dark current
• CameraLink or GigE Vision interfacing options
• Versatility with gain modes
| Bobcat 640 CL SWIR / vSWIR | Bobcat 640 GigE SWIR / vSWIR | |
| Approximate dimensions - excluding lens [width x height x length] [mm] | 55 x 55 x 72 | 55 x 55 x 82 |
| Weight [gr] - excluding lens | 285 | 334 |
| Optical interface | C-mount or M42 | C-mount or M42 |
| Connector GigE | - | RJ-45 |
| Connector CameraLink | Standard SDR | - |
| Connector power | Hirose HR10-7R-SA[73] | Hirose HR10-7R-SA[73] |
| Connector trigger | SMA | SMA |
| Bobcat 640 CL SWIR / vSWIR | Bobcat 640 GigE SWIR / vSWIR | |
| Operating case temperature [°C] | From -40 to +70; also available in temperature range 0 - 50 | From -40 to +70; also available in temperature range 0 - 50 |
| Storage temperature [°C] | From -45 to +85 | From -45 to +85 |
| Power consumption [W] | 2.8 [no TE cooler] | 4 [no TE cooler] |
| Power supply voltage | DC 12 V | DC 12 V |
| Shock | IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] | IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] |
| Vibration | Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] | Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] |
| IP rating | IP40 | IP40 |
| Regulatory compliance | CE, RoHS | CE, RoHS |
| Bobcat 640 CL SWIR / vSWIR | Bobcat 640 GigE SWIR / vSWIR | |
| Image format [pixels] | 640 x 512 | 640 x 512 |
| Pixel pitch [µm] | 20 | 20 |
| Detector type | InGaAs photodiode array with CTIA ROIC | InGaAs photodiode array with CTIA ROIC |
| Sensor temperature stabilization | TE cooler | TE cooler |
| Integration type | Snapshot - global shutter | Snapshot - global shutter |
| Active area and diagonal [mm] | 12.8 x 10.24 [diagonal 16.4] | 12.8 x 10.24 [diagonal 16.4] |
| Optical fill factor | 100% | 100% |
| Spectral range [nm] | 900 - 1700 [SWIR]; 500 - 1700 [vSWIR] | 900 - 1700 [SWIR]; 500 - 1700 [vSWIR] |
| Quantum efficiency | ~80% [typical peak value] | ~80% [typical peak value] |
| Gain modes | High Gain [HG] & High Dynamic Range [HDR] | High Gain [HG] & High Dynamic Range [HDR] |
| Full well capacities [electrons] | 45k [HG] & 500k [HDR] | 45k [HG] & 500k [HDR] |
| Read noise [electrons] | 120 [HG] & 500 [HDR] | 120 [HG] & 500 [HDR] |
| Dark current [electrons/second] | <100k [at 288K sensor temp and 150 mV reverse bias]; For vSWIR: <200k | <100k [at 288K sensor temp and 150 mV reverse bias]; For vSWIR: <200k |
| Read out mode | IWR & ITR | IWR & ITR |
| Pixel operability | >99% | >99% |
| Preconfigured exposure time range [ms] | 0.1 to 40 in HG; 0.1 to 20 in HDR | 0.1 to 10 in HG; 0.1 to 20 in HDR |
| Max frame rate [Hz] [full frame] | 100 | 100 |
| Region of interest | Yes | Yes |
| Min region size [pixels] | 32 x 4 [step 16 x 4] | 32 x 4 [step 16 x 4] |
| Max frame rate [Hz] [min region size] | >10000 | >10000 |
| Analog-to-Digital [ADC] [bits] | 14 | 14 |
| Command and control | CameraLink | GigE Vision |
| Digital output format | CameraLink [16 bit] | GigE Vision [16 bit] |
| Trigger | In or out via SMA or in via CL-CC1 [Configurable] | In or out via SMA [Configurable] |
Machine vision and deep learning edge IoT device
Matrox® Iris GTX is the next evolution of smart cameras from Matrox Imaging. Offering higher resolution sensors and substantially more processing power than its immediate predecessor, Matrox Iris GTX provides exceptional performance for a compact all-in-one vision system. Paired with flowchart-based Matrox Design Assistant® X1 software, engineers and technicians can quickly configure and deploy machine vision to the Matrox Iris GTX smart cameras. Video capture, analysis, classification, location, measurement, reading, verification, communication, and I/O operations—as well as a web-based operator interface—are all set up within the same software. Matrox Iris GTX smart cameras are model edge IoT devices, performing data acquisition and analytics, and providing results nearest to the manufacturing
Camera Link offers high data rates, deterministic timing and very direct access to the image sensor. Our high resolution industrial cameras with Camera Link provide a wide range of core features:
Camera Link permits settings and operating modes that are not available with other interfaces:
The EXO is one of the most flexible and scalable cameras for the industrial market segment. The USB3 Vision interface is easy to integrate in your system, with a data rate up to effective 360 MB/sec. Single cable interface for power an data reduces cable complexity. integrated multi channel GenICam LED light controller provides currents up to 3 A. EXO provides Plug-and-play capability for the whole range of 2.3 to 31 MP resolution.
The interface standard CoaXPress was developed to meet the need for higher bandwidth generated by recently launched sensors. SVS-Vistek is providing CoaXPress cameras with 4 CXP-6 lines. Thus, the CXP data interface is providing 25 GBit/s.
The HR series with CoaXPress is focusing on latest CMOS sensors with highest resolutions. Excellent thermal design and electronics provide superb image quality and low (structured) noise. The HR is a high end industrial camera packed with features:
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
