Product Catalog
Showing 97–112 of 667 results
Performance characteristics:
· Equipped with excellent image sensor, high dynamic range, good signal-to-noise ratio, excellent image quality
· Implant powerful ISP algorithms such as bright/dark field correction and lens shadow correction to ensure imaging consistency
· 100-level purification process control, leading quality control industry
· Support Base/Medium/Full/80-bit mode, optional pixel clock to match different transmission distance cables
· Compatible with Camera Link protocol and GenlCam standard, seamless connection with third-party software
· Comply with CE.FCC, RoHS,KC certification
Performance characteristics
· Low power consumption platform, equipped with excellent image sensor, high dynamic range, good signal ratio, excellent image quality
· Implant powerful ISP algorithms such as bright/dark field correction and lens shadow correction to ensure imaging consistency
· 100-level purification process control, leading quality control industry
· Four-channel CTP-6 or CTP-12 output, ultra-high transmission bandwidth
· Compatible with CoaXPress protocol and GenlCam standard, seamless connection with third-party software
· Comply with CE,FCC,RoHS,KC certification
Performance characteristics:
· Equipped with excellent image sensor, high dynamic range, good signal-to-noise ratio, excellent image quality
· Implant powerful ISP algorithms such as bright/dark field correction and lens shadow correction to ensure imaging consistency
· 100-level purification process control, leading quality control industry
· Gigabit network interface, maximum transmission distance up to 100m(no relay)
· Compatible with GigE Vision V2.0 protocol and GenlCam standard, seamless connection with third-party software
· Comply with CE.FCC, RoHS, KC certification
Performance characteristics:
· Equipped with excellent image sensor, high dynamic range, good signal-to-noise ratio, excellent image quality
· Implant powerful ISP algorithms such as bright/dark field correction and lens shadow correction to ensure imaging consistency
· 100-level purification process control, leading quality control industry
· Gigabit network interface, maximum transmission distance up to 100m(no relay)
· Compatible with GigE Vision V2.0 protocol and GenlCam standard, seamless connection with third-party software
· Comply with CE.FCC, RoHS, KC certification
When combining lighting, cameras, proximity sensors and encoders to generate an automated solution, the CC320 Trigger Timing Controller is the single component for fast affordable integration. With 8 independent input channels, the controller can take a range of input signals from various components and use these to trigger events on any of the 8 independent output channels.
OLED panels have many benefits in machine vision applications because they give an exceptionally stable and uniform light intensity across the width of the panel. They are also very thin and can be moulded into complex shapes. However, OLED lights are challenging to control because the physical properties inherent in OLED panels demand sophisticated drive techniques to obtain fast and accurate pulsing.
The PP1600 models can be quickly configured using our free software which can be downloaded from this page, or for the PP1620 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP1600 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS.
The PP420 models can be quickly configured using our free software which can be downloaded from this page, or simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP420 has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected.
The PP520 models can be quickly configured using our free software which can be downloaded from this page, or simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP520 has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected.
The PP610 RS232 enabled models can be quickly configured using our free software which can be downloaded from this page. If you are using a third party software package the PP610 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS.
The PP800 models can be quickly configured using our free software which can be downloaded from this page, or for the PP820 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP800 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS.
The PPCC16 combines the features of the Gardasoft PP1600 series LED Lighting Controllers with the addition of 8 digital outputs for triggering cameras or general use. With new generation LEDs the PPCC16 series can provide high intensity pulses which exceed the brightness of xenon strobes.
The RC range is Gardasoft’s latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the needs of perhaps having to use a bespoke DC power supply or heat sinking the controller. All RC models also include our SafeSense™ technology. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft RC Series controllers are therefore single channel current source devices.
The RT range is Gardasoft’s latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT200 controller range offering two output channels which are independently controlled.
The RT range is Gardasoft’s latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT200 controller range offering two output channels which are independently controlled.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
