CCS

Fits CCS Dome Light HPD-100, HPD-150, and CCS Ring Lights HPR-100 and HPR-150. This part number comes with one yoke and 2 tabs. The tabs will be used for the 100 series. If using the yoke for the 150 series the tabs are not needed but they are provided. Mounts to AFSB-1 and AFSB1XS

ADVANCED ILLUMINATION

Fits: Advanced Illumination AL116, AL126, AL143, AL150, AL179, AL295, AL4424, AL4554, AL46120, DL085, DL110, DL37100, DL38144, LL174, LL5806, and LL6324. Mounts to AFSB-1 and AFSB-1XS.

ADVANCED ILLUMINATION

Fits: Advanced Illumination AL116, AL126, AL143, AL295, DL072, DL104, DL2449, and DL3316. Mounts to AFSB-1XS.

XS BLANK

This blank plate is for end user custom mounting. Mounts to AFSB-1XS

18 MM SENSOR MOUNT

The sensor mounts are threaded for barrel-type sensors. Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your Swivel-Link® assembly for a clean look and protection from damage. Available in 18mm threaded size. Mounts to AFSB-2, AFSB-290, and AFSB-2-2XS.

8 MM SENSOR MOUNT

The sensor mounts are threaded for barrel type sensors. Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your Swivel-Link® assembly for a clean look and protection from damage. Available in 8mm threaded size. Mounts to AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS.

The AFSB-CLAMP HANDLE kit can be used in the standard and XS series knuckles (AFSB-2, AFSB290, AFSB-2XS, AFSB-2XS90, and the AFSB-2-2XS coupler) to make quick adjustments in the positioning of the arms. Remove one of the screws of the knuckle and add the spacer and handle. Once the position is set, tighten the remaining screws. The handle and spacer can then be removed and the original screw can be re-inserted, or the handle can be left on the knuckle.

EOAT KIT

This kit is ready to add a robot mounting plate and vacuum cups to create a 4 arm vacuum gripper. Includes (4) AFSB-1000-10-V gripper arms, Aluminum Extrusion, and bottom cap. Robot mounting plate must be ordered separately. Does not include Vacuum cups.