The Bobcat 320 series is based on an in-house developed, temperature stabilised InGaAs detector with a 320 x 256 pixel resolution.
The Bobcat 320 cameras are offered with frame rates of either 100 Hz or 400 Hz. The camera comes with a CameraLink or GigE Vision interface and features low weight and power.
The Bobcat 320 targets cost sensitive volume markets such as laser beam analysis applications, sorting & recycling industry and investigation of defects inside silicon semiconductor material.
Benefits & Features
• Flexible and easy-to-use
• CameraLink or GigE Vision interfacing options
• Low dark current
• Small SWIR area-scan camera
| Bobcat 320 CL 100 / 400 | Bobcat 320 GigE 100 / 400 | |
| Approximate dimensions - excluding lens [width x height x length] [mm] | 55 x 55 x 72 | 55 x 55 x 82 |
| Weight [gr] - excluding lens | 285 | 334 |
| Optical interface | C-mount or M42 | C-mount or M42 |
| Connector GigE | - | RJ-45 |
| Connector CameraLink | Standard SDR | - |
| Connector power | Hirose HR10-7R-SA[73] | Hirose HR10-7R-SA[73] |
| Connector trigger | SMA | SMA |
| Bobcat 320 CL 100 / 400 | Bobcat 320 GigE 100 / 400 | |
| Operating case temperature [°C] | From -40 to +70; also available in temperature range 0 - 50 | From -40 to +70; also available in temperature range 0 - 50 |
| Storage temperature [°C] | From -45 to +85 | From -45 to +85 |
| Power consumption [W] | 2.8 [no TE cooler] | 4 [no TE cooler] |
| Power supply voltage | DC 12 V | DC 12 V |
| Shock | IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] | IEC60068-2-27 Ed4.0; half-sine; terminal saw tooth; 50 g [11 ms] |
| Vibration | Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] | Random: IEC60068-2-64 Ed2.0; 4.3 g [20 - 1000 Hz]. Sine: IEC60068-2-6 Ed7.0; 1 g [10 - 2000 Hz] |
| IP rating | IP40 | IP40 |
| Regulatory compliance | CE, RoHS | CE, RoHS |
| Bobcat 320 CL 100 / 400 | Bobcat 320 GigE 100 / 400 | |
| Image format [pixels] | 320 x 256 | 320 x 256 |
| Pixel pitch [µm] | 20 | 20 |
| Detector type | InGaAs photodiode array with CTIA ROIC | InGaAs photodiode array with CTIA ROIC |
| Sensor temperature stabilization | TE cooler | TE cooler |
| Integration type | Snapshot - global shutter | Snapshot - global shutter |
| Active area and diagonal [mm] | 6.4 x 5.12 [diagonal 8.2] | 6.4 x 5.12 [diagonal 8.2] |
| Optical fill factor | 100% | 100% |
| Spectral range [nm] | 900 - 1700 | 900 - 1700 |
| Quantum efficiency | ~80% [typical peak value] | ~80% [typical peak value] |
| Gain modes | Single Gain | Single Gain |
| Full well capacities [electrons] | 70k | 70k |
| Read noise [electrons] | 110 | 110 |
| Dark current [electrons/second] | <100k [at 288K sensor temp and 150 mV reverse bias] | <100k [at 288K sensor temp and 150 mV reverse bias] |
| Read out mode | ITR | ITR |
| Pixel operability | >99% | >99% |
| Preconfigured exposure time range [ms] | 0.5 to 10 for 100 Hz; 0.01 to 40 for 400 Hz | 0.5 to 10 for 100 Hz; 0.01 to 40 for 400 Hz |
| Max frame rate [Hz] [full frame] | 100 or 400 | 100 or 400 |
| Region of interest | Yes [only for 400 Hz model] | Yes [only for 400 Hz model] |
| Min region size [pixels] | 32 x 4 [step 4 x 1] [only for 400 Hz model] | 32 x 4 [step 4 x 1] [only for 400 Hz model] |
| Max frame rate [Hz] [min region size] | >10000 [only for 400 Hz model] | >10000 [only for 400 Hz model] |
| Analog-to-Digital [ADC] [bits] | 14 | 14 |
| Command and control | CameraLink | GigE Vision |
| Digital output format | CameraLink [16 bit] | GigE Vision [16 bit] |
| Trigger | In or out via SMA or in via CL-CC1 [Configurable] | In or out via SMA [Configurable] |
EXO series cameras with GigE Vision interface gives your applications an extreme scalability. Quick and easy hardware interchangeability results in shorter design cycles and reduced development costs. Further value is added to your application by a virtually limitless feature set. As an example, the 4IO LED driver with standardized software control.
ECO-4IO cameras are master in LED illumination and communication and can control the timing for illumination precisely. 4 power outputs and 4 inputs (0-24 Volt) provide a maximum of control. Each output can be configured separately to fit the task and type of illumination. Together with a fully programmable sequencer, new possibilities are made available for your applications.
Having superb image quality, the all-new IC-X25B-CL provides the best performance-for-value ratio of all of ISVI’s new compact cameras. Using its Full Configuration Camera Link interface it achieves a frame rate of 30Hz. Its compact size and wide selection of standard lens mounts makes it a popular choice for users requiring a high-resolution camera but do not need the high frame rates of our CXP cameras.
Key Features:
The interface standard CoaXPress was developed to meet the need for higher bandwidth generated by recently launched sensors. SVS-Vistek is providing CoaXPress cameras with 4 CXP-6 lines. Thus, the CXP data interface is providing 25 GBit/s.
The HR series with CoaXPress is focusing on latest CMOS sensors with highest resolutions. Excellent thermal design and electronics provide superb image quality and low (structured) noise. The HR is a high end industrial camera packed with features:
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
