The heavy duty ball link is used with the heavy duty knuckle to extend the reach and increase flexiblity. The link is 6” long and both of the ball ends have a knurled ring around it to improve the rigidity of the knuckle connection.The link is hollow for the continuation of routing wires, cables, or small hoses.
This kit has a mounting plate for the Cognex Dataman 300 and the Cognex Insight 7000 series. Includes (1) AFSB-521-C-DI plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS 2” link.
This kit has a mounting plate for Baumer sensors CS100, ID100, ID110, XC100, XC200, XF100, and XF200. Includes (1) AFSB-580-B-VS plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-4XS 4” link.
This single arm Standard Series kit with an 8” link is ready to mount any standard series mounting plate. This kit includes: (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-8 link, and (1) AFSB-Clamp Handle.
The AFSB-CLAMP HANDLE kit can be used in the standard and XS series knuckles (AFSB-2, AFSB290, AFSB-2XS, AFSB-2XS90, and the AFSB-2-2XS coupler) to make quick adjustments in the positioning of the arms. Remove one of the screws of the knuckle and add the spacer and handle. Once the position is set, tighten the remaining screws. The handle and spacer can then be removed and the original screw can be re-inserted, or the handle can be left on the knuckle.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
