Mini Linear Light (Washdown)

Smart Vision Lights

The LWE150 features a 100% waterproof stainless-steel enclosure specially designed for food industry and washdown environments where water
and harsh detergents are present. The LWE150 has an integrated Multi-DriveTM constant-current driver that operates continuous operation or in
OverDriveTM strobe mode, depending on wiring configuration. Use NPN or PNP strobe triggers to control the light’s pulse. Control light intensity via
1–10V DC analog signal line when in continuous operation.

About this series

The LWE150 features a 100% waterproof stainless-steel enclosure specially designed for food industry and washdown environments where
water and harsh detergents are present. The LWE150 has an integrated Multi-DriveTM constant-current driver that operates continuous
operation or in OverDriveTM strobe mode, depending on wiring configuration. NPN or PNP strobe triggers can be used to control the pulse
of the light. Intensity of the light can be controlled via 1–10 V DC analog signal line.

ModelElectrical InputInput CurrentWattagePNP LineNPN LineOverDriveTM ModeStrobe DurationDuty CycleStrobe InputContinuous Operation ModeOn/Off InputConnection
LWE150 (Continuous)24V DC +/- 5%Max. 412 mAMax. 10 W4 mA @ 4V DC | 10 mA @ 12V DC | 20 mA @24V DC15 mA @ Common (0 V DC)Not applicableNot applicableNot applicableNot applicableNPN can be tied to ground OR PNP can be tied to 24V DC (not both)PNP: +4V DC or greater to activate NPN: GND (<1V DC) to activate5-pin M12 connector
LWE (OverDrive)24V DC +/- 5%Max. 2.80 AMax. 68 W4 mA @ 4V DC | 10 mA @ 12V DC | 20 mA @24V DC15 mA @ Common (0 V DC)Connect pin 5 to GND (see Wiring Configuration for more information)Min. 10 μs | Max. 50 ms (see SafeStrobeTM Technology for more information)Max. 10%PNP: +4 V DC or greater to activate NPN: GND (<1V DC) to activateNot applicableNot applicable5-pin M12 connector

Send Enquiry