Dark Field Ring Lights
Smart Vision Lights
Dark Field Ring Light is IP68 rated and comes in an anodized black aluminum housing. The built-in Multi-Drive™ driver
allows the light to work in continuous operation or OverDrive™ strobe mode, depending on the wiring configuration. The industry-standard
5-pin M12 connector makes for simple wiring. The 1–10V DC analog signal line gives the user total control over intensity in continuous operation
mode. Grounding the analog signal line put the light into OverDrive™ strobe mode. The DFLW-200 is available in a stainless-steel housing. A
stainless-steel housing is recommended for any food grade application or washdown environments where water or harsh detergents are present.
About this series
ADVANTAGES
- Built-in Multi-DriveTM allows the light to work in continuous
operation or OverDriveTM strobe mode - Microlens turning film directs a beam of light at a 25º angle
towards an object, resulting in a high concentration and uniform
field of illumination - SafeStrobeTM technology ensures protected operation of LEDs
- 5-pin M12 quick connect
- Built-in driver
- PNP and NPN trigger signal input
Model | Electrical Input | Input Current | Wattage | PNP Line | NPN Line | OverDriveTM Strobe Mode | Strobe Duration | Duty Cycle | Strobe Input | Continuous Operation Mode | On/Off Input | Connection |
---|---|---|---|---|---|---|---|---|---|---|---|---|
DFLW200 (Continuous) | 24V DC +/- 5% | Max. 1.48 A | Max. 35.5 W | 4 mA @ 4 V DC | 10 mA @ 12 V DC | 20 mA @24 V DC | 15 mA @ Ground (0 V DC) | Not applicable | Not applicable | Not applicable | Not applicable | NPN can be tied to ground OR PNP can be tied to 24V DC (not both) | PNP: +4V DC or greater to activate NPN: GND (<1V DC) to activate | 5-pin M12 connector |
DFLW200 (OverDrive Strobe) | 24V DC +/- 5% | Max. 12.35 A | Max. 296.4 W | 4 mA @ 4 V DC | 10 mA @ 12 V DC | 20 mA @24 V DC | 15 mA @ Ground (0 V DC) | Connect pin 5 to GND (see Wiring Configuration for more information) | Min. 10 μs | Max. 50 ms (see SafeStrobeTM Technology for more information) | Max. 10% | PNP: +4V DC or greater to activate NPN: GND (<1V DC) to activate | Not applicable | Not applicable | 5-pin M12 connector |