Product Catalog
Showing 17–32 of 154 results
The ball base has a hole pattern to fit most standard T-slot aluminum extrusions. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires.
This kit includes everything needed to add vacuum to our standard series products. Directly thread in any vacuum cup with a G1/2 fitting or use one of the included adaptors for G3/8 or G1/4 fittings. The supply hose routes back through the knuckles, links, and bases for a clean and reliable solution with no exposed hoses. We also include a special adaptor for mounting decentralized vacuum grippers that have an M8 stud. The side port allows the pressure supply to run internally and the only exposed hose is at the gripper.
This adaptor plate mounts to the robot and to aluminum 1.5” and 1.0” series extrusions either vertically or horizontally. This plate can also mount (2)
or (4) AFSB-1000-10-V vacuum arms directly onto
the plate instead of using the aluminum extrusion.
This kit adds a knuckle and a ball base to the AFSB-10-V for a great start to building your vacuum gripper. By adding links and knuckles, this kit can be extended to fit most any need. Includes (1) AFSB-10-V Vacuum Kit, (1) AFSB-1 base, (1) AFSB-2 knuckle.
This single arm Standard Series kit with a 12” link is ready to mount any standard series mounting plate. This kit includes: (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-12 link, and (1) AFSB-Clamp Handle.
This single arm Standard Series kit with a 2” link is ready to mount any standard series mounting plate. This kit includes: (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-2 link, and (1) AFSB-Clamp Handle.
This kit has the mounting plate for the Cognex Dataman 300 and the Cognex Insight 7000 series. Includes (1) AFSB-521-C-DI plate, (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-2 2” Link
This kit has a mounting plate for the Keyence CV-035/CV-200 with or without the bracket, CV-S200, CV-S035, IV150, IV500, IV 2000, XG-200M, XG-200C, XG-H200M and Mounting Wall Adaptor. Includes (1) AFSB-550-K-CVIV plate, (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-2 2” link.
This single arm XS kit with a 2” link is ready to mount any XS series mounting plate. This kit includes: (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS link, and (1) AFSB-Clamp Handle.
This kit has a mounting screw for any camera that has a 1/4-20 standard tripod mount. Includes (1) AFSB-5XS ball stem, (1) AFSB-1XS base, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS 2” link.
This kit has a mounting plate for the Cognex Dataman 300 and the Cognex Insight 7000 series. Includes (1) AFSB-521-C-DI plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS 2” link.
This kit has a mounting plate for the Cognex Dataman 50 and Dataman 60 series. Includes (1) AFSB-522XS-C-DM5060 adaptor ball mount, (1) AFSB-1XS base, (2) AFSB-2XS knuckles, (1) AFSB-3- 2XS 2” link.
This kit has the mounting plate for the Cognex Dataman 100/200/500, Insight Micro, 4G, 4GX, and Checker 200. Includes (1) AFSB-520XS-C-DMIC plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS 2” link.
This kit has a mounting plate for the Dalsa Genie M1600, TS-C4096, TS-M1920, A-CAMGM1600-00 and Boa BVS-0640. Includes (1) AFSB-500XS-D-GB plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS 2” link.
This kit has a mounting plate for the Keyence CV-035/CV-200 with or without the bracket, CV-S200, CV-S035, IV150, IV500, IV 2000, XG-200M, XG-200C, XG-H200M and Mounting Wall Adaptor. Includes (1) AFSB-550-K-CVIV plate, (2) AFSB-1XS bases, (2) AFSB-2XS knuckles, (1) AFSB-3-2XS 2” links.
This kit has a mounting plate for the SICK Lector 62X series. Includes (1) AFSB-515XS-S-ICR620 plate, (2) AFSB-1XS bases, (2) AFSB-2XS90 tee knuckles, (1) AFSB-3-2XS 2” link.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
