News

Product release: New Camera Link frame grabbers supporting custom FPGA-based processing
 

Uncategorized 23 June, 2020

The latest addition to the leading Matrox® Rapixo series of frame grabbers is the Matrox Rapixo CL Pro, supporting the highest performance Camera Link® 2.1 cameras on the market, as well as providing onboard image processing offload using a field-programmable gate rarray (FPGA) device. Each Matrox Rapixo CL Pro model ensures high frame-rate image capture, support for extended cable lengths, and the reliable image acquisition trusted in all Matrox Imaging frame grabbers.

Matrox Rapixo CL Pro boards deliver:
• Connection to highest-performance Camera Link cameras including support for Full and 80-bit mode at up to 85 MHz
• Camera Link 2.1 interface compliance
• FPGA device for offloading image processing demands from host PC
• Ample onboard buffering that eliminates missed frames
• Multi-camera support for up to four Base or two Full/80-bit Camera Link cameras per board
• Simplified cabling with support for Power-over-Camera Link (PoCL)
• Support for Windows® and Linux® OS

 


For more information, kindly send in your enquiries to info@jm-vistec.com or call +65 6748 5517.

Product release: Matrox AltiZ delivers exceptional 3D reproduction fidelity with a standard GigE Vision interface
 

Uncategorized 20 May, 2020

A unique design and novel embedded algorithms create an exceptionally elegant solution for combating occlusion effects at critical surface junctures. The Matrox AltiZ series provides a range of optimized features:

  • Unique dual-camera single-laser design delivers exceptionally high 3D reproduction fidelity by counteracting occlusions.
  • Standard GigE Vision® interface with GenICam™ extensions for seamless interoperability with machine vision software from Matrox Imaging and third-party providers.
  • Embedded algorithms to generate consistent profiles, depth maps, or point clouds.
  • IP67-rated aluminum housing, M12 connectors, and multiple fastening points for easy installation on gantries and robots in tough industrial environments.
  • Option to operate the integrated image sensors in synchronized or alternating fashion for either maximum reproduction quality or almost double the scanning speed.
  • Simplified cabling with support for Power-over-Ethernet (PoE).
  • Matrox Capture Works interactive utility for Windows® and Linux® that streamlines sensor setup and verification.

 


For more information, kindly send in your enquiries to info@jm-vistec.com or call +65 6748 5517.

Product release: Matrox Supersight Uno
 

Uncategorized 23 December, 2019

matrox

Matrox Supersight Uno is a mid-range imaging computer ideally suited for intensive image capture and processing tasks. It offers considerable expansion capabilities through seven PCIe® expansion slots ready to host multiple Matrox Imaging frame grabbers and third-party boards including high-end graphic cards.

Matrox Supersight Uno at a glance

  • Leverage eighth-generation Intel Core processor to handle demanding imaging applications
  • Interface directly with GigE Vision® and USB3 Vision® cameras
  • Support for all major video interfaces—Camera Link®, CoaXPress®, DisplayPort, HDMI, and SDI—when used in conjunction with Matrox Imaging frame grabbers
  • Maximize I/O capabilities with seven PCIe slots accepting full-height, full-length cards

 

 


For more information, kindly send in your enquiries to info@jm-vistec.com or call +65 6748 5517.

Announcement: New software release Artifical Intelligence (AI)
 

Technology News,Uncategorized 23 December, 2019

Computer vision analyzes and interprets what’s in a picture or video. Our AI solutions use computer vision to accelerate intelligent automation with simple tools for image processing, image recognition and object detection. Computer vision & deep learning experts, JM Vistec provides the best deep learning model which optimized and weight reduced for embedded systems for everyone who wants to utilize deep learning technology without professional knowledge.

 

 

 


For more information, kindly send in your enquiries to info@jm-vistec.com or call +65 6748 5517.

JM Vistec System to be featured in “Hello Singapore (狮城有约)” on Channel 8.
 

Uncategorized 5 April, 2019

asdsadasdasd

NEWS HIGHLIGHT:

During the 2nd day of the 2019 Hannover Messe event, JM Vistec System was been interview by “Hello Singapore (狮城有约)” program and to be broadcast on Channel 8 soon.

The interview will be focusing on JM Vistec System’s technology and capabilities, highlighting our 3D image processing software featuring the Fringe projection and Deflectometry setup.

Keep in touch with our news page for further updates!

interview


For more information, kindly send in your enquiries to info@jm-vistec.com or call +65 6748 5517.