The VC-16ES-S1 is a 16-channel LED light controller built for demanding machine vision and automation environments. It delivers stable constant-current control across all 16 independent channels, with high-speed strobe output up to 100 kHz and pulse current capability up to 20A ensuring precise, consistent illumination for high-accuracy inspection tasks. A wide input voltage range of 12–48VDC, combined with fine current adjustment and support for both continuous and high-current pulse operation, gives users the flexibility to meet a broad range of lighting requirements within a single unit.
Designed for seamless integration into existing automation infrastructures, the VC-16ES-S1 supports direct synchronization with camera triggers and PLC outputs, minimizing latency and ensuring reliable timing across the inspection cycle. Dual communication interfaces via Ethernet and RS232 provide compatibility with virtually any industrial control system, making setup and ongoing operation straightforward for engineering teams.
The controller is well-suited for applications across PCB and electronics inspection, semiconductor manufacturing, medical imaging, and packaging and sorting systems industries where illumination consistency directly impacts inspection integrity and throughput. Compatible with most industrial LED lighting, it is a dependable and versatile choice for high-speed inspection lines that demand both performance and ease of integration.
| Parameter | Value |
|---|---|
| Output Voltage | 12V ~ 46V @ 20A |
| Output Current | Continuous mode: up to 2A; Pulse mode: up to 20A (step size: 5mA) |
| Operating Modes | Continuous mode, Pulse mode, Switch mode |
| Trigger Signal | 16 × opto-isolated inputs: 5–24V, common cathode |
| Output Frequency | Up to 100 kHz |
| Light Source Interface | 5.08 mm pitch terminal, 8 × 4-pin connectors |
| Communication | RS232 serial port and Ethernet (TCP/UDP) |
| Input Voltage | 12 ~ 48VDC (DC input), 2-pin 5.08mm terminal connector |
| Operating Environment | Temperature: -5°C to 50°C; Humidity: 20–85% RH (non-condensing) |
| Product Dimensions | TBC |
The PP1600 models can be quickly configured using our free software which can be downloaded from this page, or for the PP1620 Ethernet enabled controller range simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP1600 range has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet or RS232 connection is disconnected. Gardasoft Controllers are universally compatible with LED Vision lighting, from manufacturers such as CCS.
The RT range is Gardasoft’s latest generation of LED lighting controller solutions for machine vision applications. Implementing our patented SafePower™ technology, installation is very easy, removing the need of having to use a bespoke DC power supply or heat sinking the controller. All RT models also include our SafeSense™ technology, which enables the safe overdriving of LEDs. To get the very best out of your LED lighting solution, in terms of brightness stability and control, lighting should be driven from a current source, not a nominal voltage supply. The Gardasoft pulse / strobe controllers are current sources, with the RT200 controller range offering two output channels which are independently controlled.
The PPCC16 combines the features of the Gardasoft PP1600 series LED Lighting Controllers with the addition of 8 digital outputs for triggering cameras or general use. With new generation LEDs the PPCC16 series can provide high intensity pulses which exceed the brightness of xenon strobes.
The PP520 models can be quickly configured using our free software which can be downloaded from this page, or simply by accessing the controller via your internet browser; type in the IP address for the controller into your browser and you have full access to all of the parameters. If you are using a third party software package the PP520 has a simple command set that is detailed in the manual allowing easy communication. As with all Gardasoft products, all the settings are stored in non-volatile memory, and it will retain these settings even when the Ethernet connection is disconnected.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
