Pulse/Direction output (current source to drive opto-isolator of stepper/servo motor drive
Analog focus control output 0-10V (e.g. to feed servo-, piezo- or voice coil controllers in open or closed loop)
Analog Quality signal output 0-10V
Industrial equipment suitable robust I/O interfacing, power supply/ground isolation, protection circuits, supply 24-48V
Single connection to AF Sensor, all connections from MSG Autofocus to your machine going through the LAF-C2
Inputs for limit switches and safety stop
Auto Focus Sensor for automated optical inspection (AOI) Systems and industrial microscopes
Analog Output of Focus Distance: 0-10V
Applicable to infinite corrected lenses from 1x to 100x magnification, VIS, IR, UV
The LAF4- ORB comes as a standalone Auto Focus sensor and provides an analog output to connect with an external stage amplifier or motor controller with analog close look Control input
UI interface
Easy Integration and Software implementation
Automated microscope with rotary lens changer
I7 is a high resolution multi-spectrum CMOSTDI image sensor with embedded CCD pixels. The sensor is composed of 1 P zone and 4 B zones. P zone features 12K-pixel resolution with 128 TDI stages, pixel size 7um*7um. B zone features 3K-pixel resolution with 64 TDI stages, pixel size 28um*28um. It is designed
with radiation hardness to work reliably in the radiation environment.
Features
High sensitivity and high dynamic range
BSI with peak QE 85%
Highly Integrated SOC with on-chip clock driver, timing & control, ADC
Advanced design structure for better Full-Well and lower noise
Enhanced NIR performance
Super radiation hardness
Applications
LEO Satellite Observation.
Industrial Inspection.
Scientific Research.
| Parameter | P zone | B zone |
|---|---|---|
| Resolution | 12,288 px | 3,072 px |
| TDI stage | 128 | 64 |
| Pixel size | 7 µm × 7 µm | 28 µm × 28 µm |
| Full well | 80 Ke⁻ | 240 Ke⁻ |
| Total noise | < 10 e⁻ | < 60 e⁻ |
| Line rate | 100 KHz | 25 KHz |
| TDI direction | Bi-direction | Bi-direction |
| ADC | 14-bit | 14-bit |
| MTF | 0.50 | 0.50 |
| FPN | < 1.2% | < 1.2% |
| PRNU | < 1.5% | < 1.5% |
| TID | 100 Krad | 100 Krad |
| SEE | 75 MeV·mg/cm² | 75 MeV·mg/cm² |
The Canon IDCCFC Series (IDCCFC-165C, IDCCFC-330C, IDCCFC-476C) is a CIS type line scan camera developed by Canon Components, Inc. for industrial surface inspection applications. Designed as a slim, compact all-in-one unit, it integrates optics, illumination, and imaging into a single housing, eliminating the need for external lighting setups.
Available in three scanning widths, the series supports resolutions of 600, 300, 200, and 150dpi, with both color and monochrome modes and a scan speed of up to 36m/min at 600dpi color. It communicates via Camera Link® and is suited for demanding machine vision tasks including print inspection, film, measurement, and web inspection.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
