The Xeva 320 series is based on an in-house manufactured InGaAs detector with a 320 x 256 pixel resolution.
The Xeva 320 cameras offer frame rates of more than 340 Hz. The camera comes with a CameraLink or USB interface.
A visible enhanced short-wave infrared (vSWIR) option for extended wavelength response into the visible band is available.
Benefits & Features
• vSWIR optional
• Sensor cooling available for increased exposure time range
• Low dark current
• USB and/or CameraLink interfacing options
• Versatility with gain modes
Xeva 1.7 320 TE1 USB 100 SWIR / vSWIR Xeva 1.7 320 TE3 USB 100 | Xeva 1.7 320 TE1 CL 60 / 100 / 350 SWIR / vSWIR Xeva 1.7 320 TE3 CL 60 / 100 / 350 | |
| Approximate dimensions - excluding lens [width x height x length] [mm] | 88 x 111 x 107; 88 x 111 x 114 [TE3] | 88 x 111 x 107; 88 x 111 x 114 [TE3] |
| Weight [gr] - excluding lens | 1300 | 1300 |
| Camera cooling | Forced convection [fan] | Forced convection [fan] |
| Optical interface | C-mount or M42 | C-mount or M42 |
| Connector USB | 4-pin TRIAD 01 | Mini-USB |
| Connector CameraLink | - | Standard MDR |
| Connector power | 4-pin TRIAD 01 | 4-pin TRIAD 01 |
| Connector trigger | 5-pin TRIAD 01 | 5-pin TRIAD 01 |
Xeva 1.7 320 TE1 USB 100 SWIR / vSWIR Xeva 1.7 320 TE3 USB 100 | Xeva 1.7 320 TE1 CL 60 / 100 / 350 SWIR / vSWIR Xeva 1.7 320 TE3 CL 60 / 100 / 350 | |
| Ambient operating temperature range [°C] | From 0 to +50 | From 0 to +50 |
| Storage temperature [°C] | From -40 to 80 | From -40 to 80 |
| Power consumption [W] | Up to 30 | Up to 30 |
| Power supply voltage | DC 12 V | DC 12 V |
| Regulatory compliance | CE, RoHS | CE, RoHS |
Xeva 1.7 320 TE1 USB 100 SWIR / vSWIR Xeva 1.7 320 TE3 USB 100 | Xeva 1.7 320 TE1 CL 60 / 100 / 350 SWIR / vSWIR Xeva 1.7 320 TE3 CL 60 / 100 / 350 | |
| Image format [pixels] | 320 x 256 | 320 x 256 |
| Pixel pitch [µm] | 30 | 30 |
| Detector type | InGaAs photodiode array with CTIA ROIC | InGaAs photodiode array with CTIA ROIC |
| Sensor cooling | TE cooler; 3-stage TE cooler [TE3] | TE cooler; 3-stage TE cooler [TE3] |
| Integration type | Snapshot - global shutter | Snapshot - global shutter |
| Active area and diagonal [mm] | 9.6 x 7.68 [diagonal 12.3] | 9.6 x 7.68 [diagonal 12.3] |
| Optical fill factor | 100% | 100% |
| Spectral range [nm] | 900 - 1700 [SWIR]; 500 - 1700 [vSWIR] | 900 - 1700 [SWIR]; 500 - 1700 [vSWIR] |
| Quantum efficiency | ~80% [typical peak value] | ~80% [typical peak value] |
| Gain modes | High Gain (HG) & High Dynamic Range (HDR) | High Gain (HG) & High Dynamic Range (HDR) |
| Full well capacities [electrons] | 170k [HG] & 3.5M [HDR] | 170k [HG] & 3.5M [HDR] |
| Read noise [electrons] | 150 [HG] & 1000 [HDR] | 150 [HG] & 1000 [HDR] |
| Dark current [electrons/second] | <200k at 280K sensor temperature; <10k at 223K sensor temperature [TE3] | <200k at 280K sensor temperature; <10k at 223K sensor temperature [TE3] |
| Read out mode | ITR | ITR |
| Pixel operability | >99% | >99% |
| Preconfigured exposure time range [ms] | 1 - 20; 1 - 200 [TE3] - max exposure time for TE3 is >10 seconds in HG | 1 - 20; 1 - 200 [TE3] - max exposure time for TE3 is >10 seconds in HG |
| Max frame rate [Hz] [full frame] | 100 | 60, 100 or 344 |
| Region of interest | Yes | Yes [not for 60 Hz and 100 Hz model] |
| Min region size [pixels] | 32 x 8 | 128 x 8 [not for 60 Hz and 100 Hz model] |
| Max frame rate [Hz] [min region size] | >10000 | >10000 [not for 60 Hz and 100 Hz model] |
| Analog-to-Digital [ADC] [bits] | 12 | 14 |
| Command and control | USB 2.0 | USB 2.0 |
| Digital output format | USB 2.0 | CameraLink [14 bit] [max 100 Hz frame rate with USB 2.0] |
| Trigger | In via trigger connector | In via trigger connector - only recommended with CameraLink data interface |
Key Features:
Key Features:
Key Features:
Properties of light that are invisible to humans can be made visible with cameras from SVS-Vistek. These cameras extend the standard industrial image processing system in terms of polarization planes or wavelengths from infrared to ultraviolet.
Wavelengths from infrared to ultraviolet enable invisible markings, the identification of materials and much more. Properties of light such as polarization facilitate industrial inspection in many industrial applications with non-metallic materials. We offer highly sensitive cameras for technical and biological applications.
Our EXO and FXO series SWIR cameras with SONY SenSWIR sensor offer outstanding performance and precision to meet the most demanding industrial applications.
Whether for quality control, material analysis or scientific research – our UV technology opens up new possibilities for you and increases the efficiency of your processes.
Our polarized industrial cameras set new standards in industrial image processing by offering the unique ability to filter reflected light and thus make hidden details visible.
All of our special cameras for invisible properties of light are based on the proven camera concepts of the EXO series and the FXO series. While the EXO covers the established GigE Vision and USB3 Vision interfaces, the FXO series can provide the highest frame rates with its high-speed 10GigE and CoaXPress-12 interfaces.
A close thermal connection of the low-power optimized electronics and the sensor to the housing enables operating temperatures of up to 60°C. The integrated power I/O interface enables simple control tasks to be performed with hardware precision via the PLC functionality. Up to 4 LED lights can be controlled directly without additional drivers, ideal for the identification of materials. All Beyond Visible cameras from SVS-Vistek have the following features: Region of Interest (ROI), logical trigger functions (PLC) with programmable timers, sequencers and logic, electrical and optical inputs are specified with TTL-24V.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
