The Wildcat+ 1280 series is based upon a state-of-the-art InGaAs photodiode array with 1280×1024 pixels and 5 μm pixel pitch. The camera offers superior, high-resolution SWIR imaging capabilities, comes in a versatile and industry-proven Wildcat camera package (GenICam compliant) and offers advanced on-board image processing.
The Wildcat+ 1280 camera outputs full frame images at 120 Hz via either a CameraLink or USB3 Vision interface.
The Wildcat+ 1280 is suitable for semiconductor inspection, display inspection (mobile phone and TV), microscopy and laser beam analysis.
Benefits & Features
• Compact and industry-proven camera design
• High-resolution SWIR imaging
• Advanced on-board image processing performance
• GenlCam compliant
• Flexible optical mount and lens options
| Wildcat+ 1280 CL | Wildcat+ 1280 U3V | |
| Approximate dimensions - excluding lens [width x height x length] [mm] | 55 x 55 x 72 | 55 x 55 x 91.5 |
| Weight [gr] - excluding lens | 345 | 385 |
| Optical interface | C-mount or M42 | C-mount or M42 |
| Connector USB | - | USB 3.0 type micro-B |
| Connector CameraLink | Standard SDR | - |
| Connector power/trigger/serial command | Lemo 1B.308 (unified connector) | Lemo 1B.308 (unified connector) |
| Wildcat+ 1280 CL | Wildcat+ 1280 U3V | |
| Operating case temperature [°C] | From -40 to +70 | From -40 to +70 |
| Storage temperature [°C] | From -40 to +85 | From -40 to +85 |
| Power consumption [W] | <7 | <7 |
| Power supply voltage | DC 12 V | DC 12 V |
| Shock | 40 g, 11 ms, according to MIL-STD810G | 40 g, 11 ms, according to MIL-STD810G |
| Vibration | 5 g [20 to 2000 Hz], according to MIL-STD810G | 5 g [20 to 2000 Hz], according to MIL-STD810G |
| IP rating | IP40 | IP40 |
| Regulatory compliance | CE | CE |
| Wildcat+ 1280 CL | Wildcat+ 1280 U3V | |
| Image format [pixels] | 1280 x 1024 | 1280 x 1024 |
| Pixel pitch [µm] | 5 | 5 |
| Detector type | InGaAs photodiode array with ROIC | InGaAs photodiode array with ROIC |
| Sensor temperature stabilization | TE cooler | TE cooler |
| Integration type | Snapshot - global shutter | Snapshot - global shutter |
| Active area and diagonal [mm] | 6.4 x 5.12 [diagonal 8.2] | 6.4 x 5.12 [diagonal 8.2] |
| Optical fill factor | 100% | 100% |
| Spectral range [nm] | 400 - 1700 | 400 - 1700 |
| Quantum efficiency | ~77% [typical peak value] | ~77% [typical peak value] |
| Gain modes | Single Gain | Single Gain |
| Full well capacities [electrons] | 160k | 160k |
| Read noise [electrons] | 200 | 200 |
| Dark current [electrons/second] | <3k | <3k |
| Read out mode | IWR [< 7.5 ms] & ITR | IWR [< 7.5 ms] & ITR |
| Pixel operability | >99.5% | >99.5% |
| Preconfigured exposure time range [ms] | 0.5 ms & 5 ms & 7.5 ms | 0.5 ms & 5 ms & 7.5 ms |
| Max frame rate [Hz] [full frame] | 120 | 120 |
| Region of interest | Yes | Yes |
| Min region size [pixels] | 4 x 8 [step size 4 pixels in X & 8 pixels in Y] | 4 x 8 [step size 4 pixels in X & 8 pixels in Y] |
| Max frame rate [Hz] [min region size] | >3 kHz | >3 kHz |
| Command and control | CameraLink Base | USB 3 Vision |
| Digital output format | CameraLink Base (16 bit) | USB 3 Vision (16 bit) |
| Trigger | 2 trigger in & 2 trigger out - LVCMOS 3.3 V | 2 trigger in & 2 trigger out - LVCMOS 3.3 V CameraLink trigger in |
Features:
● Compatible to UVC and USB3 Vision
● Sony Pregius and Pregius S CMOS sensors
● Onboard image pre-processing
Having superb image quality, the all-new IC-X25B-CL provides the best performance-for-value ratio of all of ISVI’s new compact cameras. Using its Full Configuration Camera Link interface it achieves a frame rate of 30Hz. Its compact size and wide selection of standard lens mounts makes it a popular choice for users requiring a high-resolution camera but do not need the high frame rates of our CXP cameras.
Key Features:
Features:
● Reversible Type-C port connection
● Sony STARVIS and Pregius CMOS sensors
● Single-board cameras
Key Features:
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
