Matrox Rapixo CXP is a next-generation frame grabber series supporting CoaXPress 2.0 for machine vision. Available in single, dual, and quad-input configurations, it supports data rates of up to 6.25 Gbps (CXP-6) or 12.5 Gbps (CXP-12) per connection, with PCIe host interface matched to handle maximum input bandwidth.
Key features include high-density BNC connectors, Power-over-CoaXPress (PoCXP) on each connection to combine power and data over a single coaxial cable, connection aggregation on dual and quad models for higher throughput, onboard memory buffering for when the host is temporarily busy, and a fanless design on select models for low-maintenance operation.
| Feature | RAP4G4C12 | RAP4G4C6X4 | RAP4G4C6 | RAP2G2C12 | RAP8G4C12P602 | RAP8G4C12P352 | RAP1G1C12 | RAP4G4C12DF |
|---|---|---|---|---|---|---|---|---|
| Series | Rapixo CXP | Rapixo CXP | Rapixo CXP | Rapixo CXP | Rapixo CXP Pro | Rapixo CXP Pro | Rapixo CXP | Rapixo CXP |
| Channels | Quad | Quad | Quad | Dual | Quad | Quad | Single | Quad |
| CXP standard | CXP-12 | CXP-6 | CXP-6 | CXP-12 | CXP-12 | CXP-12 | CXP-12 | CXP-12 |
| PCIe interface | 3.1 x8 | 3.1 x4 | 2.1 x8 | 3.1 x4 | 3.1 x8 | 3.1 x8 | 2.1 x4 | 3.1 x8 |
| Memory | 4 GB | 4 GB DDR4 SDRAM | 4 GB | 2 GB | 8 GB | 8 GB | 1 GB DDR3 | 4 GB |
| FPGA | — | — | — | — | XCKU060 | XCKU035 | — | — |
| Cooling | Passive heatsink | Passive heatsink | Passive heatsink | Passive heatsink | Fansink | Fansink | Passive heatsink | Passive heatsink |
| Data forwarding | — | — | — | — | — | — | — | Yes |
| GPIO cable adaptor included | 1× mDP-to-HD15 | 1× mDP-to-HD15 | 1× mDP-to-HD15 | None (sold separately) | 1× mDP-to-HD15 | 1× mDP-to-HD15 | None (sold separately) | 1× mDP-to-HD15 |
The Axion-CL is the most powerful CL frame grabber BitFlow has ever manufactured. A natural addition to this family was obvious…a CL Base version. The Axion xB series will be replacing the Neon series of Camera Link frame grabbers.
The Axion-CL also benefits from other products in BitFlow’s line up. The Axion-CL uses the Cyton-CXP’s backend: the StreamSync DMA engine and buffer manager. A brand new PCIe Gen 2 interface, with DMA optimized for modern (fully loaded, fully busy) computers.
Moving from the Neon family to the Axion family is simple. No need to make changes to your code, just recompile with the latest SDK. If you are using a 3rd party application, such as Cognex Vision Pro or LabVIEW, just download the latest driver and your program will already be supported. The same application can support both the Axion and the Neon family (as well as our CXP line of frame grabbers).
Connectors on the Axion 2xB are the same as those on the Neon CLD, so your existing cable infrastructure will not need to be changed.
The Aon-CXP is low cost single link CoaXPress frame grabber. While it looks tiny, it has all the power of its big brother, the Cyton. It supports CXP camera speeds up to 6.25 Gb/S. The technology that Machine Vision components are built on are advancing rapidly in performance while size and costs are plummeting. CoaXPress cameras, which traditionally were power hungry, large, and expensive, are now small, cool, and affordable. Single link cameras are coming out that are 29mm cubes. While this sounds tiny, they can still receive 6.25 Gb/S worth of data over the link, almost twice the real world data rate of the USB3 Vision standard and significantly quicker than the latest GigE Vision data rates. This means you can get 2 MP images at 300 FPS! The Aon CXP has been designed for this low cost/high-performance market.
A small foot print single link CXP camera mated with the Aon-CXP can provide all the convenience of a GigE Vision or USB3 Vision camera system. It can compete on price; can exceed the cable lengths in many cases; and can provide a host of Machine Vision features missing from GigE Vision or USB3 Vision camera systems (triggers, encoders, strobe, waveform generators, quadrature encoder support, etc.). Furthermore, because of the Aon’s advanced DMA engine, no CPU resources are used in moving images to host memory.
One of the biggest advantages of buying a frame grabber over a GigE Vision or USB3 Vision camera is that all of the hardware and software components of the capture system are sourced from one manufacturer. It is not a bunch of separate blocks from different manufacturers (including Intel and Microsoft). BitFlow wrote every line of software and firmware and designed all their own hardware, which means if you have a problem we can support you. If the problem is on our side, we can fix it ourselves and get you a solution in a short amount of time.
To develop the Cyton platform we first started with a clean slate and asked ourselves, “What does a next generation frame grabber need?”. For sure, For sure, it needs a high speed back end for the ultimate high speed access to host memory. It also needs a sophisticated DMA engine to handle the demands of new camera interface standards. New standards demand flexibility. CXP cameras will soon be able to put out streams of random sized ROIs, something our previous generation DMA engine was not capable of. Finally, we know based on years of experience of making frame grabbers that it needs flexible and powerful I/O, triggering, and routing. The CoaXPress front end is based on our Karbon-CXP, but upgraded and ready for the coming changes in the CXP standards. The Cyton platform is the foundation for today and tomorrow’s frame grabbers, whether it’s CoaXPress, Camera Link, or whatever new standards emerge from the Machine Vision industry.
To develop the Cyton platform we first started with a clean slate and asked ourselves, “What does a next generation frame grabber need?”. For sure, For sure, it needs a high speed back end for the ultimate high speed access to host memory. It also needs a sophisticated DMA engine to handle the demands of new camera interface standards. New standards demand flexibility. CXP cameras will soon be able to put out streams of random sized ROIs, something our previous generation DMA engine was not capable of. Finally, we know based on years of experience of making frame grabbers that it needs flexible and powerful I/O, triggering, and routing. The CoaXPress front end is based on our Karbon-CXP, but upgraded and ready for the coming changes in the CXP standards. The Cyton platform is the foundation for today and tomorrow’s frame grabbers, whether it’s CoaXPress, Camera Link, or whatever new standards emerge from the Machine Vision industry.
The Cyton CXP4-V is designed for small form factor fanless computers where airflow isn’t sufficient to dissipate the FPGA heat.
+65 6748 5517
info@jm-vistec.com
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
