Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 		Products
   
  p Industry Camera
- DALSA
 
- HITACHI
 
- IRCAM
- SVS VISTEK
- THE IMAGING SOURCE
- VISION & CONTROL
  p Lenses
  p Lighting
  p Lighting Controller
  p Framegrabber
  p Calibration Plates
  p 2D Handheld Scanner
  Processing Software
   

 

 

  
HV-HD201:  

The Hitachi color camera HV-HD201 is separate Head multi format HDTV camera that supports.

The HV-HD201 of C-mount small Head and CCU (Camera Control Unit) by 1/2 size CCD image sensor, the Hitachi's digital signal processing technology. The camera has HD-SDI output that is a standard interface in broadcast and HD-output (HDMI Connector) (Option) that is a consumer interface, so the camera can fit for variety of applications.

Features:

  • High resolution High sensitivity
  • Full Multi format camera Output.
  • Digital processing enables quality enhancement functions
  • CCD drive functions
  • Scene file
  • Remote Control

 
SPECIFICATIONS: HV-HD201
Scan system 1080/59.94i , 1080/50i , 720/59.94p , 720/50p, *480/59.94i,* 576/50i *ɿVBS ,Y/C Only )
Image sensor 1/2-size CCD image sensor
Total pixels 1504 (H) x 1099 (V)
Actual pixels 1440 (H) x 1080 (V)
Actual image area 6.98 mm (H) x 3.92 mm (V)
Imaging system R, G, B 3-CCD
Lens mount C-mount ( flange back 17.526 mm in air )
Horizontal resolution 800 TV line ( Center of luminance channel at 1080i, HD-SDI )
Standard sensitivity F8.0 ( 2000lx, 3200K, reflection ratio 89.9% )
S/N 56dB
Gain 0dB to +18dB 1dB step
Shutter Preset 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
Variable 1/59.94 to 1/10000 ( 1080/59.94i ) 1/50. to 1/10000 ( 1080/50i )
Scene file 4 Scene file

Color bar
Power supply voltage

 ARIB bar
12V DC ( Stable operation at 10.5 to 15 VDC )
Power consumption Approx. 28W
Dimension Head : 50mm (W) x 50mm (H) x 55mm (D)
CCU : 188mm (W) x 75mm (H) x 190mm (D)
Ambient temperature Operation 0 to 40℃
Storage -20 to 60℃
Camera cable 5.5m, 10m ( Option )
Input signals HD-SYNC ( 3 state, for 720p or 1080i ) ( BNC Connector x1 )
Serial data (REMOTE Connector )
Output signals HD-SDI ( BNC SDI- Connector x1 ) 0.8Vp-p / 75Ω
HD output ( HDMI Connector x1, ( HV-HD201M only )
Analog output ( D-sub 15pin Connector x1 )
Analog HD/SD output Y, Pb, Pr / R,G,BɹY : 1.0Vp-p/75Ω, SYNC ( 3 state )
Composite Video ( BNC Connector x1 ) VBS : 1.0Vp-p / 75Ω
S-VIDEO ( Y/C Connector x1 )
Y : 1.0Vp-p / 75Ω, C : 0.285Vp-p ( burst ) / 75Ω, ( NTSC ) , C : 0.3Vp-p ( burst ) / 75Ω ( PAL ),
Serial data ( REMOTE 4pin Connector x1 )
LENS IRIS ( LENS 4pin Connector x1 CCU )

Dimensions:

 
 
KP-D591:  

The KP-D591 is most suitable for a wide rang of applications. Because the KP-D591 is provided with various functions including the picture expansion function by electronic zoom, auto white balance, ES lens output, genlock and sensitivity setting.

Features:

  • High Sensitivity and High Resolution
  • Digital Signal Processor
  • Backlight Correction
  • Auto White Balance Control
  • Text Display
  • Remote Control (RS-232C Interface)
  • Picture Quality Adjustment Menu
  • Electronic Zoom
  • Noise reduction
  • High Speed Electronic Shutter

 
  • Integration system using the CCD exposure time control system and a field memory to provide continuous video output.
  • Digital Signal Processing system featuring various correction and control features for the video signal in the digital domain.
  • High density 410,000 pixel microlens CCD.

 

 
SPECIFICATIONS: KP-D591

Imaging device

 

Effective pixels
Total pixels

 KP-D591:1/2 "
Inter-line CCD with micro lenss on chip
NTSC
768 (H) x494 (V)
811 (H) x508 (V)		 PAL
752 (H) x582 (V)
795 (H) x595 (V)
Scanning system 2:1 interlaced

Scanning frequency

Hor.
Vert.

 

NTSC
15.734 kHz
59.94 kHz

 

PAL
15.625 kHz
50 Hz

Resolution

Standard
Exposure

 NTSC
H:480 TVL
H:440 TYL 		PAL
H:470 TVL
H:440 TVL		 NTSC/PAL
V:350 TVL
V:260 TVL
Signal-to-noise ratio 50 dB
Sensitivity Standard
KP-D591 1.0 lx(Max AGC)		 Max
0.01 lx(AGC max. 6.4x. F1.2)
Illumination range KP-D591 0.01 lx to 100.000 lx(f1.2 ES lens)
Signal processing system Digital signal processing A/D:10-bit Processing:8-bit
Video signal output Composite video signal:1.0 Vp-p/75 ohm, unbalanced
BNC connector
Sync system Internal or external(Line Lock).
AGC ON/OFF switchable
Max gain at ON:6,12, 21, 31 dB(Factory setting:21 dB)
Electronic shutter speed 11steps selectable
1/60 (PAL,1/50),1/100,1/250,1/500,1/1000,1/2000,
1/4000,1/10,000,1/20,000,1/30,000,AUTO.
Backlight correction Backlight correction using 9 photometric areas.
Output for auto iris lens Video signal input type or iris cntrol voltage input type switchable.
(1) Video signal input type lens mode (VIDEO)
      Video signal:1.0 Vp-p/high impedance
      Power supply:12 VDC,max.60 mA
(2) Iris control voltage input type (Galvanometer type)
      lens mode (DC)
      Impedance
      Damper:1150 ohm ±10 %
      Driv:190 ohm ±10 %
      Connector:Square type, 4-pin
Text display Up to 24 alphanumerics can be displayed and position can be set.
White balance control

3 control modes selectable
     (1) Auto tracking (ATW)mode
     (2) Preset (AWC) mode 
     (3) Manual (MANUAL)mode (R/B gain adjustment)
Sensitivity setting Automatic sensitivity (AUTO) or fixed sesitivity (MANUAL)selectable.
Maximum sensitivity can be set in AUTO mode.
Standard sensitivity (NTSC:1/60 s, PAL:1/50 s) or 2 to64 times.

Electronic zoom

 Max. magnification:4 times
Picturre quality Adjustment of each item and selection of each mode
Adjustment menu can be made, using menu screens.
(1) Text display ON/OFF, text editable, display position
      settable (TOP or BOTTOM).
(2)Level detection area selectable
(3)Iris level adjustable
(4)AGC ON/OFF
(5)White balance
(6)Shutter speed
(7)Gamma correction ON/OFF
(8)Video signal polarity selectable
(9)Chroma level adjustable
(10)Black level adjustable
(11)Contour correction amaunt adjustable
(12)Exposure time setting AUTO/MANUAL
      Max. exposure time can ve set, up to 2 to 64 times
      in step by fields in AUTO mode.
(13)Electronic zoom
      Zoom ratio: Nomal to 4 times (Adjustable).
Lens mount C/CS mount (C-mount adaptor)
Camera mount Bottom: 1/4 ", 20UNC
With supplied tripod adaptor TA-231 needed
Operating conditions -10 to +50 °C, 30 to 80 %RH
Storage conditions -20 to +60 °C, 20 to 90 %RH
Anti-vibration 3G or less
Power supply U: 117 VAC ±10 %, 60 Hz, E/K:230 VAC ±10 %, 50 Hz
Power consumption KP-D591 U 6 W
KP-D591 E/K 7 W
Dimensions 64 (W)x63 (H)x122 (D)xmm (Excl. lens and protusions)
Mass KP-D591U 740 g
KP-D591E 750 g
KP-D591K 700 g
Composition Camera KP-D591/KP-D28
Operation manual x1
Fuse x1
C-mount adaptor x1 Lens plug(E4-191J-100)
Optional accessories Lenses
Remote plug, HR10A-10P-12P(01)

 

Dimensions:
 
 



 
 

 

 
 
 
 
  © JM Vistec Pte Ltd 2010. All Rights Reserved.