Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 		Products
   
  Industrial Camera
- TELEDYNE DALSA
 
- HITACHI
 
- IRCAM
- SVS VISTEK
- THE IMAGING SOURCE
  - VISION & CONTROL
  - KAPPA
- NEOPT
  p Lenses
  p Lighting
  p Lighting Controller
  p Framegrabber
  p Calibration Plates
  Filters
  p 2D Handheld Scanner
  Processing Software
  Imaging Computers
  3D Camera
   
HITACHI KP-M30:

The KP-M30 are compact, lightweight, black and white cameras. The KP-M30 uses the high grade 1/3-inch image size CCD. The total pixel number of each CCD is 410,000(490,000 for CCIR).

  • 2:1 interlaced : External switch can be set Integration mode,
    field or frame
  • Electronic shutter : 8 electronic shutter speeds are
    selectable to 1/10,000 sec.
  • Synchronization
    Internal synchronization is automatically switched to External
    synchronization by the supplied sync signals(HD/VD).
  • External HD/VD I/O : External switch selection
  • Analog video output : VS 1.0Vp-p output can be checked
    by Black-and-White monitor.
  • Anti-vibration design and ultra compact body permit
    easy inserting into various equipments.
 

SPECIFICATIONS:

KP-M30
Imaging device 1/3-inch Interline CCD
Sensing area

EIA: 4.88(H) × 3.66mm (1/3 type)
CCIR: 4.89(H) × 3.64mm (1/3 type)
Pixel size EIA: 6.35(H) × 7.4(V) m
CCIR: 6.5(H) × 6.25(V) m
Total pixels KP-M30N EIA: 811(H) × 508(V)     KP-M30P CCIR: 795(H) × 596(V)
Effective pixels KP-M30N EIA: 768(H) × 494(V)     KP-M30P CCIR: 752(H) × 582(V)
Resolution EIA : 570 TV lines (H) / 485TV lines (V)     CCIR : 560 TV lines (H) / 575TV lines (V)
Sensitivity 200L x F4 3200K Min Gain
Min. illumination 0.3Lx, F1.4 AGC, Gamma ON
S/N 60dB Min Gain
Horizontal scan frequency EIA: 15.734KHz CCIR: 15.625KHz
Vertical scan frequency EIA: 59.94Hz CCIR: 50Hz

Sync system

 Internal/external (automatic selection)
Internal synchronization
scanning system		 2 : 1 interlaced
Integration mode Field or frame, External switch can be set. The Factory setting is Frame.
Lens mount C mount
Power supply 12 ± 1V DC Approx 1.4W
Dimensions 29(W)×29(H)×38.5(D)mm
Mass

Approx. 55g

 

Dimensions:

 

Data Sheet/ Manual: KP-M30 PDF

 

 
 
 
 
  © JM Vistec Pte Ltd 2010. All Rights Reserved.